Newswise — WASHINGTON, D.C., November 11, 2014 -- A team of University of Maryland researchers is growing vertically aligned “forests” of carbon nanotubes on three-dimensional (3-D) conductive substrates to explore their potential use as a cathode in next-gen lithium batteries.

During the AVS 61st International Symposium & Exhibition, being held November 9-14, 2014, in Baltimore, Md., the team will describe their process for creating lithium-oxygen (Li-O2) battery cells.

Carbon nanotubes are typically grown on two-dimensional or planar substrates, but the structure developed by the team is considered “3-D” because the carbon nanotubes are grown on a porous, “sponge-like” foam structure made of nickel coated with aluminum oxide ceramic.

Batteries usually consist of an anode, cathode and electrolyte; the researchers’ 3-D structure forms the “cathode” part of the battery.

“Our team developed self-standing, catalyst-decorated carbon nanotube cathodes for Li-O2 batteries using atomic layer deposition (ALD) and electrochemical deposition methods,” said Marshall Schroeder, a member of the Rubloff Research Group in Materials Science and Engineering at the University of Maryland. “And we also have unique capabilities for in situ characterization via scanning electron microscopy and X-ray photoelectron spectroscopy for elemental analysis of pristine electrodes and at different points during cycling.”

How does the team build their battery cathode? First, they use a nickel foam current collector to deposit a thin layer (~5nm) of aluminum oxide using ALD. This is chased by a layer of iron, sputtered as a growth catalyst for chemical vapor deposition (CVD) of carbon.

The ALD layer “acts as a diffusion barrier to keep the growth catalyst from diffusing into the nickel foam during the high-temperature carbon growth process,” Schroeder explained. “The type of carbon growth is heavily dependent on the CVD process parameters—catalyst ripening temperature/time, growth time/temperature, precursor type, and flow rate, etc.—so optimization of the growth process was required to achieve a vertically aligned carbon nanotube architecture.”

These structures were put to the test as cathodes in lithium oxygen cells, and the team discovered that the optimized growth process resulted in a hierarchical pore structure featuring dense carpets of vertically aligned carbon nanotubes on a 3-D current collector scaffold.

Preliminary studies of this cathode structure show promising results for oxygen reduction reaction (ORR) performance, according Schroeder. “For the oxygen evolution reaction (OER), continued studies will focus on optimization of the electrode performance via decoration with ALD-deposited catalysts,” he adds. “We’ve also started studying the catalyst performance on other carbon nanotube substrates and now have a preliminary fundamental understanding of the catalyst chemistries developed by our team.”

The team’s work shows that combining their ALD capabilities with the unique structure of the 3-D cathode may “significantly improve the performance of one of the most promising next-generation lithium battery technologies,” Schroeder noted.

Presentation #EN+EM+NS-TuA8, "Vertically Aligned Carbon Nanotubes on Ni Foam as a 3D Li-O2 Battery Cathode," by Marshall Schroeder, M. Noked, A.J. Pearse, A.C. Kozen, S.B. Lee and G.W. Rubloff is at 4:40 p.m. Eastern Time on Tuesday, Nov. 11, 2014.

###

MORE ABOUT THE AVS 61st INTERNATIONAL SYMPOSIUM & EXHIBITIONThe symposium takes place from November 9-14 at the Baltimore Convention Center, which is located at One West Pratt Street in Baltimore, Maryland, 21201. The headquarters hotel is the Sheraton Inner Harbor at 300 South Charles Street in Baltimore, Maryland, 21201.

USEFUL LINKSMain symposium website: http://www.avs.org/Meetings-Exhibits/Information Technical Program: http://www.avssymposium.org/Media Center: https://www.avs.org/About/Press-Media-Center Baltimore Convention Center: http://www.bccenter.orgSheraton Inner Harbor: http://www.sheratoninnerharbor.com

PRESSROOMThe AVS Pressroom will be located in the Charles Street Lobby Staff Office of the Baltimore Convention Center. Pressroom hours are Monday-Thursday, 8:00 a.m. - 5:00 p.m. Your press badge will allow you to utilize the pressroom to write, interview, collect new product releases, review material, or just relax. The press badge will also admit you, free of charge, into the exhibit area, lectures, and technical sessions, as well as the Welcome Mixer at 5:30 p.m. ET on Monday in Ballroom III of the Baltimore Convention Center and the Awards Ceremony and Reception at 6:30 p.m. ET on Wednesday night in Ballroom I-II of the Baltimore Convention Center.

To request free press registration, please contact Jason Socrates Bardi at [email protected] and Della Miller at [email protected].

ABOUT AVSFounded in 1953, AVS is a not-for-profit professional society that promotes communication between academia, government laboratories, and industry for the purpose of sharing research and development findings over a broad range of technologically relevant topics. Its symposia and journals provide an important forum for the dissemination of information in many areas of science and technology, enabling a critical gateway for the rapid insertion of scientific breakthroughs into manufacturing realities. See: http://www.avs.org/About

###