Report Sheds New Insights on the Spin Dynamics of a Material Candidate for Low-Power Devices

In a report published in Nano LettersArgonne researchers reveal new insights into the properties of a magnetic insulator that is a candidate for low-power device applications; their insights form early stepping-stones towards developing high-speed, low-power electronics that use electron spin rather than charge to carry information.

Researchers Find Computer Code That Volkswagen Used to Cheat Emissions Tests

An international team of researchers has uncovered the mechanism that allowed Volkswagen to circumvent U.S. and European emission tests over at least six years before the Environmental Protection Agency put the company on notice in 2015 for violating the Clean Air Act. During a year-long investigation, researchers found code that allowed a car's onboard computer to determine that the vehicle was undergoing an emissions test.

Physicists Discover That Lithium Oxide on Tokamak Walls Can Improve Plasma Performance

A team of physicists has found that a coating of lithium oxide on the inside of fusion machines known as tokamaks can absorb as much deuterium as pure lithium can.

Scientists Perform First Basic Physics Simulation of Spontaneous Transition of the Edge of Fusion Plasma to Crucial High-Confinement Mode

PPPL physicists have simulated the spontaneous transition of turbulence at the edge of a fusion plasma to the high-confinement mode that sustains fusion reactions. The research was achieved with the extreme-scale plasma turbulence code XGC developed at PPPL in collaboration with a nationwide team.

Green Fleet Technology

New research at Penn State addresses the impact delivery trucks have on the environment by providing green solutions that keep costs down without sacrificing efficiency.

Scientists Demonstrate New Real-Time Technique for Studying Ionic Liquids at Electrode Interfaces

This electron microscope-based imaging technique could help scientists optimize the performance of ionic liquids for batteries and other energy storage devices.

How Scientists Turned a Flag Into a Loudspeaker

A paper-thin, flexible device created at Michigan State University not only can generate energy from human motion, it can act as a loudspeaker and microphone as well, nanotechnology researchers report in the May 16 edition of Nature Communications.

Assembling Life's Molecular Motor

As part of a project dedicated to modeling how single-celled purple bacteria turn light into food, a team of computational scientists from the University of Illinois at Urbana-Champaign (UIUC) simulated a complete ATP synthase in all-atom detail. The work builds on the project's first phase--a 100-million atom photosynthetic organelle called a chromatophore--and gives scientists an unprecedented glimpse into a biological machine whose energy efficiency far surpasses that of any artificial system.

Engineering Researchers Apply Data Science to Better Predict Effect of Weather and Other Conditions on Solar Panels

In a new study, a team of researchers from Case Western Reserve University and Gebze Technical University (GTU) in Turkey used data science to determine and predict the effects of exposure to weather and other conditions on materials in solar panels.

More Natural Dust in the Air Improves Air Quality in Eastern China

Man-made pollution in eastern China's cities worsens when less dust blows in from the Gobi Desert, according to a new study. That's because dust plays an important role in determining the air temperatures and thereby promoting winds to blow away man-made pollution. Less dust means the air stagnates, with man-made pollution sticking around longer.


Rensselaer Polytechnic Institute Graduates Urged to Embrace Change at 211th Commencement

Describing the dizzying pace of technological innovation, former United States Secretary of Energy Ernest J. Moniz urged graduates to "anticipate career change, welcome it, and manage it to your and your society's benefit" at the 211th Commencement at Rensselaer Polytechnic Institute (RPI) Saturday.

ORNL Welcomes Innovation Crossroads Entrepreneurial Research Fellows

Oak Ridge National Laboratory today welcomed the first cohort of innovators to join Innovation Crossroads, the Southeast region's first entrepreneurial research and development program based at a U.S. Department of Energy national laboratory.

Department of Energy Secretary Recognizes Argonne Scientists' Work to Fight Ebola, Cancer

Two groups of researchers at Argonne earned special awards from the office of the U.S. Secretary of Energy for addressing the global health challenges of Ebola and cancer.

Jefferson Science Associates, LLC Recognized for Leadership in Small Business Utilization

Jefferson Lab/Jefferson Science Associates has a long-standing commitment to doing business with and mentoring small businesses. That commitment and support received national recognition at the 16th Annual Dept. of Energy Small Business Forum and Expo held May 16-18, 2017 in Kansas City, Mo.

Rensselaer Polytechnic Institute President's Commencement Colloquy to Address "Criticality, Incisiveness, Creativity"

To kick off the Rensselaer Polytechnic Institute Commencement weekend, the annual President's Commencement Colloquy will take place on Friday, May 19, beginning at 3:30 p.m. The discussion, titled "Criticality, Incisiveness, Creativity," will include the Honorable Ernest J. Moniz, former Secretary of Energy, and the Honorable Roger W. Ferguson Jr., President and CEO of TIAA, and will be moderated by Rensselaer President Shirley Ann Jackson.

ORNL, University of Tennessee Launch New Doctoral Program in Data Science

The Tennessee Higher Education Commission has approved a new doctoral program in data science and engineering as part of the Bredesen Center for Interdisciplinary Research and Graduate Education.

SurfTec Receives $1.2 Million Energy Award to Develop Novel Coating

The Department of Energy has awarded $1.2 million to SurfTec LLC, a company affiliated with the U of A Technology Development Foundation, to continue developing a nanoparticle-based coating to replace lead-based journal bearings in the next generation of electric machines.

Ames Laboratory Scientist Inducted Into National Inventors Hall of Fame

Iver Anderson, senior metallurgist at Ames Laboratory, has been inducted into the National Inventors Hall of Fame.

DOE HPC4Mfg Program Funds 13 New Projects to Improve U.S. Energy Technologies Through High Performance Computing

A U.S. Department of Energy (DOE) program designed to spur the use of high performance supercomputers to advance U.S. manufacturing is funding 13 new industry projects for a total of $3.9 million.

Penn State Wind Energy Club Breezes to Victory in Collegiate Wind Competition

The Penn State Wind Energy Club breezed through the field at the U.S. Department of Energy Collegiate Wind Competition 2017 Technical Challenge, held April 20-22 at the National Wind Technology Center near Boulder, Colorado--earning its third overall victory in four years at the Collegiate Wind Competition.


Casting a Wide Net

Designed molecules will provide positive impacts in energy production by selectively removing unwanted ions from complex solutions.

New Software Tools Streamline DNA Sequence Design-and-Build Process

Enhanced software tools will accelerate gene discovery and characterization, vital for new forms of fuel production.

The Ultrafast Interplay Between Molecules and Materials

Computer calculations by the Center for Solar Fuels, an Energy Frontier Research Center, shed light on nebulous interactions in semiconductors relevant to dye-sensitized solar cells.

Supercapacitors: WOODn't That Be Nice

Researchers at Nanostructures for Electrical Energy Storage, an Energy Frontier Research Center, take advantage of nature-made materials and structure for energy storage research.

Groundwater Flow Is Key for Modeling the Global Water Cycle

Water table depth and groundwater flow are vital to understanding the amount of water that plants transmit to the atmosphere.

Finding the Correct Path

A new computational technique greatly simplifies the complex reaction networks common to catalysis and combustion fields.

Opening Efficient Routes to Everyday Plastics

A new material from the Inorganometallic Catalyst Design Center, an Energy Frontier Research Center, facilitates the production of key industrial supplies.

Fight to the Top: Silver and Gold Compete for the Surface of a Bimetallic Solid

It's the classic plot of a buddy movie. Two struggling bodies team up to drive the plot and do good together. That same idea, when it comes to metals, could help scientists solve a big problem: the amount of energy consumed by making chemicals.

Saving Energy Through Light Control

New materials, designed by researchers at the Center for Excitonics, an Energy Frontier Research Center, can reduce energy consumption with the flip of a switch.

Teaching Perovskites to Swim

Scientists at the ANSER Energy Frontier Research Center designed a two-component layer protects a sunlight-harvesting device from water and heat.

Penn State Wind Energy Club Breezes to Victory in Collegiate Wind Competition

Article ID: 674313

Released: 2017-05-08 12:05:50

Source Newsroom: Penn State College of Engineering

  • Credit: Dennis Schroeder/National Renewable Energy Lab

    The Penn State Wind Energy Club took first place overall and first place in the Tunnel Testing contest at the DoE Collegiate Wind Competition 2017 Technical Challenge.

UNIVERSITY PARK, Pa. — The Penn State Wind Energy Club breezed through the field at the U.S. Department of Energy Collegiate Wind Competition 2017 Technical Challenge, held April 20-22 at the National Wind Technology Center near Boulder, Colorado—earning its third overall victory in four years at the Collegiate Wind Competition.

The Penn State team, comprised of 11 students from various engineering majors, beat out nine other teams from across the nation, earning a total of 762 points out of a possible 1,000, which was 161 points ahead of the second-place finisher. The team also took first place in the Tunnel Testing contest with a score of 365 points out of a possible 450.

“The advisers of the team are extremely proud of the Wind Energy Club students for their hard work on this wind competition activity,” said Susan Stewart, lead strategic adviser of the team and senior research associate and assistant professor of aerospace engineering. “They are getting really great experience in systems thinking and putting their overall engineering education to work as they tackle the challenges of this project.”

The Collegiate Wind Competition 2017 Technical Challenge is an opportunity for institutions that participated in the U.S. Department of Energy Collegiate Wind Competition 2016, which Penn State won, to capture the spirit of team collaboration and apply the acquired skills and knowledge to the technical challenge event. The competition focused on testing a small-scale wind turbine in a portable wind tunnel designed and built by the National Renewal Energy Laboratory. This year’s event also added the challenge of testing in yawed inflow to address changing wind directions.

“Even though we won the main event last year, we came in third place in 2015 at the exact same technical competition in the exact same location, so we had some extra motivation this year,” said Jason Cornelius, aerodynamics team lead, vice president of the Wind Energy Club and a senior in aerospace engineering. “It was all new to us in 2015, and since all of the 2014 team members had graduated, there wasn’t any significant knowledge transfer to our team. However, we spent the last two years trying to build a turbine based on what we learned that would allow us to come back and pull out a victory. It was pretty exciting to redeem ourselves.”

Each team was required to design, build and present a unique, wind-driven power system; document the design of the turbine and load in a technical report; and present on the design and report to a panel of judges.

Additionally, teams participated in a bonus event—an educationally focused siting challenge that required students to balance competing objectives of maximizing power production, minimizing costs and minimizing environmental and community impact.

Building on its innovative, winning turbine design for the 2016 competition, the team was able to improve the design and efficiency of this year’s turbine by focusing on several key generator components according to Mitch Proulx, generator team lead, president of the Wind Energy Club and a senior in mechanical engineering.

“We used a one-stage generator last year, which performed extremely well, but we wanted to add more stages this time to generate even more power,” said Proulx. “By using three stages, along with replacing some of the iron parts with 3D-printed parts, we were able to significantly increase our power because the generator was not only more efficient, but it weighed 22 percent less than it used to weigh.” 

The team also realized gains through improvements to its electrical components which were designed by Patrick Nicodemus, electrical design team lead and a senior in electrical engineering and mathematics.

“Patrick was able to design a circuit that would regulate the voltage so as to not exceed the maximum limit for the competition, morphing itself as it drew power from the turbine,” said Cornelius. “It was crazy.”

Senior members of the team will be passing along their knowledge to their teammates to help them and future members continue their success.

“The Collegiate Wind Competition Technical Challenge provides a great opportunity for senior members of the team to mentor underclassmen and provide them with guidance towards being future leaders for the Penn State Wind Energy Club and upcoming Department of Energy Collegiate Wind Competitions,” said Stewart.

The team will now focus its efforts on defending its title at the Collegiate Wind Competition 2018, which will take place during the annual American Wind Energy Association WINDPOWER Conference and Exhibition in Chicago, Illinois, May 7–10, 2018. Penn State will compete against 11 other universities.