Newswise — WASHINGTON, D.C., October 31, 2017 -- Advanced microphones using microelectromechanical systems (MEMS) are capable of supporting new user interactions with “smart” devices, like chatting with Apple’s Siri, or Amazon’s Alexa. The key to achieving the high sensitivity desired for these microphones, you might be surprised to learn, is tied to the “admittance” or “compliance” of its membrane components. 

Polysilicon is the material most commonly used as a membrane for microphone devices today. But, in general, single-crystal and polycrystalline-silicon-based devices are brittle and prone to fractures that can cause interior defects during the fabrication processes. This has lead researchers to search for a replacement material. 

During the AVS 64th International Symposium & Exhibition, being held Oct. 29-Nov. 3, 2017, in Tampa, Florida, researchers from WPI-Advanced Institute for Materials Research/Micro System Integration Center at Tohoku University, in Japan, will present their work with a potential replacement material that shows promise for MEMS microphones: amorphous metallic glass. 

“One of the most important specifications to evaluate these devices is signal-to-noise ratio (SNR),” said Mai Phuong Nguyen, assistant professor at Tohuku University. “SNR is a good indicator of the minimum sound level that a microphone can detect within a quiet environment.” 

Until now, most studies focused on improving the SNR, according to Nguyen, which is proportional to the “compliance” of the membrane. “But no significant results have been achieved, due to the limitations of polysilicon,” Nguyen said. 

Metallic glasses, however, share the properties of both metals and glasses. Like glasses, they have a “supercooled liquid region,” in which the viscosity can be controlled. 

“[T]heir amorphous structure means that metallic glasses are free of crystalline defects -- dislocation, point defects, stacking faults, etc.,” Nguyen said. “So metallic glasses possess high strength and low stiffness, which gives them the ability to store elastic strain energy and release it.” 

The MEMS fabrication processes are typically done at a temperature of 200 degrees C or higher, and the materials must undergo chemical corrosion during the stripping processes in lithography steps, which also etch for patterning or structuring of the device. “Thermal budgets and chemical resistance may potentially have a strong impact on device performance and this needs to be explored further,” Nguyen said. 

The group prepared a cobalt tantalum boron (CoTaB) amorphous metallic glass by a sputter technique, a simple method commonly used by the semiconductor industry. The final thickness ranges from 100 nanometers to several micrometers, controlled by simply changing sputter conditions. They were able to confirm the most important properties of metallic glass: an amorphous structure with metallic glass behavior. 

“We also explored the mean and gradient stress, which appear to have a strong impact on the sensitivity of devices,” Nguyen said. “And we further studied compressive and tensile stress under different deposition conditions, as well as their compatibility with MEMS manufacturing processes.” 

Microphones are already well established in a full range of consumer products. “But there is clearly room to increase their reach within the audio supply and value chain, which would enhance audio capabilities,” Nguyen said.


Presentation MN+BI+EM+SS+TR-TuM6, “Metallic Glass for MEMS Microphone Device” by MaiPhuong Nguyen, is at 9:40 a.m. EDT, Oct. 31, 2017, in Room 24 in the Tampa Convention Center, Tampa, Florida.



The symposium is being held Oct. 29-Nov. 3, 2017, in Tampa, Florida.


Main symposium website:
Technical Program:
Media Center:


To request free press registration, please contact Della Miller at [email protected].


As an interdisciplinary, professional Society, AVS supports networking among academic, industrial, government, and consulting professionals involved in a variety of disciplines - chemistry, physics, biology, mathematics, all engineering disciplines, business, sales, etc. through common interests related to the basic science, technology development, and commercialization of materials, interfaces, and processing area. 

Founded in 1953, AVS is organized into technical divisions and technical groups that encompass a range of established as well as emerging science and technology areas. There are also regional chapters, international chapters and affiliates, and student chapters that promote communication and networking for professionals and students within a geographical region. AVS is comprised of approximately 4,500 members worldwide. 

AVS is a member society of the American Institute of Physics with additional benefits for our members. For more information about AVS, visit our website at