EMBARGOED FOR RELEASE: Wednesday, Aug. 23, 2017, 5 a.m. Eastern Time

Note to journalists: Please report that this research will be presented at a meeting of the American Chemical Society.

Newswise — WASHINGTON, Aug. 23, 2017 — Using plants and trees to make products such as paper or ethanol leaves behind a residue called lignin, a component of plant cell walls. That leftover lignin isn’t good for much and often gets burned or tossed into landfills. Now, researchers report transforming lignin into carbon fiber to produce a lower-cost material strong enough to build car or aircraft parts.

The researchers will present their work today at the 254th National Meeting & Exposition of the American Chemical Society (ACS). ACS, the world’s largest scientific society, is holding the meeting here through Thursday. It features nearly 9,400 presentations on a wide range of science topics.

“Lignin is a complex aromatic molecule that is mainly burned to make steam in a biorefinery plant, a relatively inefficient process that doesn’t create a lot of value,” says Birgitte Ahring, Ph.D., the principal investigator on the project. “Finding better ways to use leftover lignin is really the driver here. We want to use biorefinery waste to create value. We want to use a low-value product to create a high-value product, which will make biorefineries sustainable.”

In addition, there are potential benefits on the carbon fiber side of the equation. Carbon fiber made with lignin would be more sustainable and less expensive than fibers currently being produced. The carbon fiber found in modern cars and aircraft are typically made from polyarylonitrile (PAN), which is a pricey, non-renewable polymer. “PAN can contribute about half of the total cost of making carbon fiber,” Jinxue Jiang, Ph.D., says. He is a postdoctoral fellow in the Ahring laboratory at Washington State University. "Our idea is to reduce the cost for making carbon fiber by using renewable materials, like biorefinery lignin." Other researchers have tried to make carbon fibers from 100 percent lignin, Jiang says, but ended up with a fiber too weak for the automotive industry. "We wanted to combine the high strength of PAN with the low cost of the lignin to produce an automobile-grade carbon fiber."

To develop a strong yet cheap carbon fiber, Ahring’s team mixed lignin with PAN in varying amounts, from 0 to 50 percent. They melded the polymers together into a single fiber using a process called melt spinning. “You elevate the temperature of the polymer blend until it melts, so it can flow,” Jiang says. “Then, you spin these polymer melts until the fiber forms.” Using a variety of methods, including nuclear magnetic resonance spectroscopy, calorimetry and electron microscopy, the researchers evaluated the fibers’ structural and mechanical characteristics. They found that they could get away with as much as 20-30 percent lignin without sacrificing strength. The lignin carbon fibers could, the researchers say, have automobile applications such as internal parts, castings and tire frames.

As a next step, the researchers will be taking their fibers to an automobile manufacturing plant to test their strength in a real-world scenario. “If we can manage to get a fiber that can be used in the automobile industry, we will be in a good position to make biorefineries more economically viable, so they can sell what they usually would discard or burn,” Ahring says. “And the products would be more sustainable and less expensive.”

Funding for the research comes from the National Science Foundation Center for Bioplastics and Biomaterials along with Ford and Hyundai Motor Companies.

The American Chemical Society, the world’s largest scientific society, is a not-for-profit organization chartered by the U.S. Congress. ACS is a global leader in providing access to chemistry-related information and research through its multiple databases, peer-reviewed journals and scientific conferences. ACS does not conduct research, but publishes and publicizes peer-reviewed scientific studies. Its main offices are in Washington, D.C., and Columbus, Ohio.

To automatically receive press releases from the American Chemical Society, contact [email protected].

Follow us:  Twitter | Facebook




Lowering the carbon foot print of the automobile industry through the in-mixing of modified biorefinery lignin for producing durable interior materials in cars


Utilization of lignin in carbon fibers preparation offers a sustainable alternative to non-renewable materials as well as value-added co-products for lignocellulosic biorefinery. Primarily, these biorefinery lignin streams are burnt for energy or discarded through landfills and can present a low-cost alternative for carbon fibers. To produce automobile-grade carbon fiber, in this study, biorefinery lignin from wet explosion pretreatment of poplar was chemically modified and blended with polyarylonitrile (PAN) before melt spinning into lignin fibers. Esterification of the polar hydroxyl groups in lignin with acid anhydrides was conducted to enhance the miscibility of carbon fiber precursor. Ionic liquid [BIMIM]Cl as an external plasticizer facilitates melt-spinning of the polymer blends into fibers. Precursor fine filaments were melt spun with a variety of lignin loading levels (0-50%). The influence of esterification and physical blending on the structures and properties of the resulting fiber were evaluated by a series of characterization techniques, including nuclear magnetic resonance (NMR), elementary analysis, Differential scanning electronic microscopy (SEM), scanning differential calorimetry (DSC) and thermogravimetric analysis (TGA). Results indicate that esterification facilitate miscibility of lignin with PAN during blending. The structural and mechanical properties of carbon fibers from lignin/PAN blends were mainly dependent on the lignin content in the blending system. Studies indicated that at 20% blending with lignin, PAN-lignin films showed greater mechanical strength but lower extensibility when compared to 100% PAN. These studies also indicated that the carbon fiber composites produced from PAN-lignin blends (up to 30wt% blending) can be used in several low to medium strength automobile applications such as internal parts, castings and tire frames. The findings from this study provides insights on new avenues to utilize a low-cost biorefinery lignin stream to produce high-value carbon fiber composites resulting in subsequent cost savings for automobile and aircraft industries.

Register for reporter access to contact details

254th National Meeting & Exposition of the American Chemical Society (ACS)