DOE News
    Doe Science news source
    The DOE Science News Source is a Newswise initiative to promote research news from the Office of Science of the DOE to the public and news media.
    • 2020-03-18 15:05:31
    • Article ID: 728393

    Three national laboratories achieve record magnetic field for accelerator focusing magnet

    • Credit: Dan Cheng, Lawrence Berkeley National Laboratory

      This new magnet reached the highest field strength ever recorded for an accelerator focusing magnet. Designed and built by Fermilab, Brookhaven National Laboratory and Lawrence Berkeley National Laboratory, it will be the first niobium-tin quadrupole magnet ever to operate in a particle accelerator — in this case, the future High-Luminosity Large Hadron Collider at CERN.

    • Credit: Brookhaven National Laboratory

      The magnet gets ready for a test at Brookhaven National Laboratory.

    Media contact

    • Karen McNulty Walsh, Brookhaven National Laboratory, kmcnulty@bnl.gov, 631-344-8350, 917-699-0501
    • Laurel Kellner, Lawrence Berkeley National Laboratory, lkellner@lbl.gov, 510-590-8034
    • Leah Hesla, Fermilab, media@fnal.gov, 630-840-3351

    In a multiyear effort involving three national laboratories from across the United States, researchers have successfully built and tested a powerful new magnet based on an advanced superconducting material. The eight-ton device — about as long as a semi-truck trailer — set a record for the highest field strength ever recorded for an accelerator focusing magnet and raises the standard for magnets operating in high-energy particle colliders.

    The Department of Energy’s Fermilab, Brookhaven National Laboratory and Lawrence Berkeley National Laboratory designed, built and tested the new magnet, one of 16 they will provide for operation in the  High-Luminosity Large Hadron Collider at CERN laboratory in Europe. The 16 magnets, along with another eight produced by CERN, serve as “optics” for charged particles: They will focus beams of protons into a tiny, infinitesimal spot as they approach collision inside two different particle detectors.

    The ingredient that sets these U.S.-produced magnets apart is niobium-tin – a superconducting material that produces strong magnetic fields. These will be the first niobium-tin quadrupole magnets ever to operate in a particle accelerator.

    Like the current Large Hadron Collider, its high-luminosity successor will smash together beams of protons cruising around the 17-mile ring at close to the speed of light. The HL-LHC will pack an additional punch: It will provide 10 times the collisions that are possible at the current LHC. With more collisions come more opportunities to discover new physics.

    And the machine’s new focusing magnets will help it achieve that leap in delivered luminosity.

    “We’ve demonstrated that this first quadrupole magnet behaves successfully and according to design, based on the multiyear development effort made possible by DOE investments in this new technology,” said Fermilab scientist Giorgio Apollinari, head of the U.S. Accelerator Upgrade Project, which leads the U.S.-based focusing-magnet project.

    “It’s a very cutting-edge magnet, really on the edge of magnet technology,” said Brookhaven National Laboratory scientist Kathleen Amm, the Brookhaven representative for the Accelerator Upgrade Project.

    What makes it successful is its impressive ability to focus.

    Focus, magnets, focus

    In circular colliders, two beams of particles race around the ring in opposite directions. An instant before they reach the collision point, each beam passes through a series of magnets that focus the particle beams into a tiny, infinitesimal spot, much the way lenses focus light rays to a point. Now packed as tightly with particles as the magnets can get them — smash! — the beams collide.

    The scientific fruitfulness of that smash depends on how dense the beam is. The more particles that are crowded into the collision point, the greater the chance of particle collisions.

    You get those tightly packed beams by sharpening the magnet’s focus. One way to do that is to widen the lens. Consider light:

    “If you try to focus the light from the sun using a magnifying glass at a small point, you want to have a more ‘powerful’ magnifying glass,” said Ian Pong, Berkeley Lab scientist and one of the control account managers.

    A larger magnifying glass focuses more of the sun’s rays than a smaller one. However, the light rays at the outer rim of the lens have to be bent more sharply in order to approach the same focal point.

    Or consider a group of archers shooting arrows at an apple: More arrows will stick if the archers shoot from above, below and either side of the apple than if they are stationed at one post, firing from the same position.

    The analog of the magnifying glass size and the archer array is the magnet’s aperture — the opening of the passageway the beam takes as it barrels through the magnet’s interior. If the particle beam is allowed to start wide before being focused, more particles will arrive at the intended focal point — the center of the particle detector.

    The U.S. team widened the LHC focusing magnet’s aperture to 150 millimeters, more than double the current aperture of 70 millimeters.

    But of course, a wider aperture isn’t enough. There is still the matter of actually focusing the beam, which means forcing a dramatic change in the beam’s size, from wide to narrow, by the time the beam reaches the collision point. And that requires an exceptionally strong magnet.

    “The magnet has to squeeze the beam more powerfully than the LHC’s present magnets in order to create the luminosity needed for the HL-LHC,” Apollinari said.

    To meet the demand, scientists designed and constructed a muscular focusing magnet, calculating that, at the required aperture, it would have to generate a field exceeding 11.4 teslas. This is up from the current 7.5-tesla field generated by the niobium-titanium-based LHC quadrupole magnets. (For accelerator experts: The HL-LHC integrated luminosity goal is 3,000 inverse femtobarns.)

    In January, the three-lab team’s first HL-LHC focusing magnet delivered above the goal performance, achieving an 11.5-tesla field and running continuously at this strength for five straight hours, just as it would operate when the High-Luminosity LHC starts up in 2027.

    “These magnets are the currently highest-field focusing magnets in accelerators as they exist today,” Amm said. “We’re really pushing to higher fields, which allows us to get to higher luminosities.”

    The new focusing magnet was a triumph, thanks to niobium-tin.

    Niobium-tin for the win

    The focusing magnets in the current LHC are made with niobium-titanium, whose intrinsic performance limit is generally recognized to have been reached at 8 to 9 teslas in accelerator applications.

    The HL-LHC will need magnets with around 12 teslas, about 250,000 times stronger than the Earth’s magnetic field at its surface.

    “So what do you do? You need to go to a different conductor,” Apollinari said.

    Accelerator magnet experts have been experimenting with niobium-tin for decades. Electrical current coursing through a niobium-tin superconductor can generate magnetic fields of 12 teslas and higher — but only if the niobium and tin, once mixed and heat treated to become superconductive, can stay intact.

    “Once they’re reacted, it becomes a beautiful superconductor that can carry a lot of current, but then it also becomes brittle,” Apollinari said.

    Famously brittle.

    “If you bend it too much, even a little bit, once it’s a reacted material, it sounds like corn flakes,” Amm said. “You actually hear it break.”

    Over the years, scientists and engineers have figured out how to produce niobium-tin superconductor in a form that is useful. Guaranteeing that it would hold up as the star of an HL-LHC focusing magnet was another challenge altogether.

    Berkeley, Brookhaven and Fermilab experts made it happen. Their assembly process is a delicate, involved operation balancing niobium-tin’s fragility against the massive changes in temperature and pressure it undergoes as it becomes the primary player in a future collider magnet.

    The process starts with wires containing niobium filaments surrounding a tin core, provided by an outside manufacturer. The wires are then fabricated into cables at Berkeley in just the right way. The teams at Brookhaven and Fermilab then wind these cables into coils, careful to avoid deforming them excessively. They heat the coils in a furnace in three temperature stages, a treatment that takes more than a week. During heat treatment the tin reacts with the filaments to form the brittle niobium-tin.

    Having been reacted in the furnace, the niobium-tin is now at its most fragile, so it is handled with care as the team cures it, embedding it in a resin to become a solid, strong coil.

    That coil is now ready to serve as one of the focusing magnet’s four poles. The process takes several months for each pole before the full magnet can be assembled.

    “Because these coils are very powerful when they are energized, there is a lot of force trying to push the magnet apart,” Pong said. “Even if the magnet is not deforming, at the conductor level there will be a strain, to which niobium-tin’s performance is very sensitive. The management of the stress is very, very important for these high-field magnets.”

    Heat treating the magnet coils — one of the intermediate steps in the magnet’s assembly — is also a subtle science. Each of the four coils of an HL-LHC focusing magnet weighs about one ton and has to be heat-treated evenly — inside and out.

    “You have to control the temperature well. Otherwise the reaction will not give us the best performance,” Pong said. “It’s a bit like cooking. It’s not just to achieve the temperature in one part of the coil but in the entire coil, end to end, top to bottom, the whole thing.”

    And the four coils have to be aligned precisely with one another.

    “You need very high field precision, so we have to have very high precision in how they align these to get good magnetic-field uniformity, a good quadrupole field,” Amm said.

    The fine engineering that goes into the U.S. HL-LHC magnets has sharpened over decades, with a payoff that is energizing the particle accelerator community.

    “This will be the first use of niobium-tin in accelerator focusing magnets, so it will be pretty exciting to see such a complex and sophisticated technology get implemented into a real machine,” Amm said.

    “We were always carrying the weight of responsibility, the hope in the last 10, 20 years — and if you want to go further, 30, 40 years — focusing on these magnets, on conductor development, all the work,” Pong said. “Finally, we are coming to it, and we really want to make sure it is a lasting success.”

    The many moving parts of an accelerator collaboration

    Ensuring lasting success has as much to do with the operational choreography as it does with the exquisite engineering. Conducting logistics that span years and a continent requires painstaking coordination.

    “Planning and scheduling are very important, and they’re quite challenging,” Pong said. “For example, transportation communication: We have to make sure that things are well protected. Otherwise these expensive items can be damaged, so we have to foresee issues and prevent them. Delays also have an impact on the whole project, so we have to ensure components are shipped to destination in a timely schedule.”

    Amm, Apollinari and Pong acknowledge that the three-lab team have met the challenges capably, operating as a well-oiled machine.

    “The technologies developed at Fermilab, Brookhaven and Berkeley helped make the original LHC a success. And now again, these technologies out of the U.S. are really helping CERN be successful,” Amm said. “It’s a dream team, and it’s an honor to be a part of it.”

    The U.S.-based Accelerator Upgrade Project for the HL-LHC, of which the focusing-magnet project is one piece, kicked off in 2016, growing out of a 2003 predecessor R&D program that focused on similar accelerator technology projects.

    From now until about 2025, the U.S. labs will continue to build the large, hulking tubes, starting with fine strands of niobium and tin. They plan to begin delivering in 2022 the first of 16 magnets, plus four spares, to CERN. Installation will take place over the three years following.

    “People say that ‘touchdown’ is a very beautiful word to describe the landing of an airplane, because you have a huge metal object weighing hundreds of tons, descending from the sky, touching a concrete runway very gently,” Pong said. “These magnets are not too different from that. Our magnets are massive superconducting devices, focusing tiny invisible particle beams that are flying close to the speed of light through the bore. It’s quite magical.”

    The magic starts in 2027, when the High-Luminosity LHC comes online.

    “We are doing today the work that future young researchers will use in 10 or 20 years from now to push the frontier of human knowledge, just like it happened when I was a young researcher here at Fermilab, using the Tevatron,” Apollinari said. “It’s a generational passing of the baton. We need to make the machines for the future generations, and with this technology, obviously what we can enable for the future generation is a lot.”

    Learn more about the High-Luminosity LHC in Symmetry and in an 11-minute Fermilab YouTube video.

    Fermilab is America’s premier national laboratory for particle physics and accelerator research. A U.S. Department of Energy Office of Science laboratory, Fermilab is located near Chicago, Illinois, and operated under contract by the Fermi Research Alliance LLC, a joint partnership between the University of Chicago and the Universities Research Association, Inc. Visit Fermilab’s website at www.fnal.gov and follow us on Twitter at @Fermilab.

    This accelerator magnet work is supported by the Department of Energy Office of Science.

    Fermilab is supported by the Office of Science of the U.S. Department of Energy. The Office of Science is the single largest supporter of basic research in the physical sciences in the United States and is working to address some of the most pressing challenges of our time. For more information, please visit energy.gov/science.

    X
    X
    X
    • Filters

    • × Clear Filters
    Argonne researchers create active material out of microscopic spinning particles

    Argonne researchers create active material out of microscopic spinning particles

    Argonne researchers have created a new kind of self-healing active material out of "microspinners," which self-assemble under a magnetic field to form a lattice.

    Global Environmental Changes Leading to Shorter, Younger Trees

    Global Environmental Changes Leading to Shorter, Younger Trees

    Ongoing environmental changes are transforming forests worldwide, resulting in shorter and younger trees. Researchers found that a range of factors, including rising temperatures and carbon dioxide levels, have caused a dramatic decrease in the age and stature of forests.

    Researchers use ALCF resources to model the spread of COVID-19

    Researchers use ALCF resources to model the spread of COVID-19

    Argonne researchers lead highly detailed COVID-19 modeling efforts to understand how the virus spreads through populations.

    Return of the Blob: Scientists find surprising link to troublesome turbulence at the edge of fusion plasmas

    Return of the Blob: Scientists find surprising link to troublesome turbulence at the edge of fusion plasmas

    Correlation discovered between magnetic turbulence in fusion plasmas and troublesome blobs at the plasma edge.

    Novel insight reveals topological tangle in unexpected corner of the universe

    Novel insight reveals topological tangle in unexpected corner of the universe

    In a recent theoretical study, scientists discovered the presence of the Hopfion topological structure in nano-sized particles of ferroelectrics -- materials with promising applications in microelectronics and information technology.

    New insights into the dynamic edge of fusion plasmas could help capture the power that drives the sun and stars

    New insights into the dynamic edge of fusion plasmas could help capture the power that drives the sun and stars

    Unique PPPL simulations reveal new understanding of the highly complex edge of fusion plasmas.

    Researchers capture the coordinated dance between electrons and nuclei in a light-excited molecule

    Researchers capture the coordinated dance between electrons and nuclei in a light-excited molecule

    Using SLAC's high-speed "electron camera," scientists simultaneously captured the movements of electrons and nuclei in a light-excited molecule. This marks the first time this has been done with ultrafast electron diffraction, which scatters a powerful beam of electrons off materials to pick up tiny molecular motions.

    Untangling a key step in photosynthetic oxygen production

    Untangling a key step in photosynthetic oxygen production

    Researchers zeroed in on a key step in photosynthesis in which a water molecule moves in to bridge manganese and calcium atoms in the catalytic complex that splits water to produce breathable oxygen. What they learned brings them one step closer to obtaining a complete picture of this natural process, which could inform the next generation of artificial photosynthetic systems that produce clean and renewable energy from sunlight and water. Their results were published in the Proceedings of the National Academy of Sciences today.

    Platinum-free catalysts could make cheaper hydrogen fuel cells

    Platinum-free catalysts could make cheaper hydrogen fuel cells

    Argonne scientists studied platinum-free catalysts for important fuel cell reactions. The research provides understanding of the mechanisms that make the catalysts effective, and it could inform production of more efficient and cost-effective catalysts.

    Electrons Break Rotational Symmetry in Exotic Low-Temp Superconductor

    Electrons Break Rotational Symmetry in Exotic Low-Temp Superconductor

    This odd behavior may promote the material's ability upon cooling to perfectly conduct electricity in a way unexplained by standard theories.


    • Filters

    • × Clear Filters
    Lehigh University graduate student wins DOE award to conduct thesis research at PPPL

    Lehigh University graduate student wins DOE award to conduct thesis research at PPPL

    Article profiles Vincent Graber, his research interests and thesis plans.

    Lograsso named Critical Materials Institute Director

    Lograsso named Critical Materials Institute Director

    Dr. Thomas Lograsso has been named director of the U.S. Department of Energy's Critical Materials Institute (CMI) at Ames Laboratory.

    Renowned scientist to head new research for plasma applications in industry and quantum information science

    Renowned scientist to head new research for plasma applications in industry and quantum information science

    The Princeton Plasma Physics Laboratory has appointed David Graves, an internationally known chemical engineer, to head a new research enterprise that will explore plasma applications in semiconductor manufacturing and the next generation of super-fast quantum computers.

    Argonne physicist Giulia Galli earns two top honors for outstanding research and leadership

    Argonne physicist Giulia Galli earns two top honors for outstanding research and leadership

    Galli elected to both the American Academy of Arts and Sciences and the National Academy of Sciences.

    Brookhaven Biochemist Receives Prestigious Award for Plant Lipid Research

    Brookhaven Biochemist Receives Prestigious Award for Plant Lipid Research

    Jantana Keereetaweep, a biochemistry research associate in the biology department at the U.S. Department of Energy's Brookhaven National Laboratory, has been awarded the Paul K. Stumpf Award for her research on plant lipids (fats and oils). The award, given every two years, recognizes the contributions of a promising early-career scientist in honor of Stumpf, who was a world leader and pioneer in the study of plant lipid biochemistry.

    ORNL's Brian Post named SME Young Engineer of the Year

    ORNL's Brian Post named SME Young Engineer of the Year

    Brian Post, a researcher in large-scale additive manufacturing at Oak Ridge National Laboratory, has been selected as a recipient of the 2020 Outstanding Young Manufacturing Engineer Award by the Society of Mechanical Engineers (SME).

    Fourth cohort of 6 innovators selected for Chain Reaction Innovations program

    Fourth cohort of 6 innovators selected for Chain Reaction Innovations program

    Six new innovators will be joining Chain Reaction Innovations (CRI), the entrepreneurship program at the U.S. Department of Energy's (DOE) Argonne National Laboratory, as part of the elite program's fourth cohort.

    Graduate student at PPPL Ian Ochs wins top Princeton University fellowship

    Graduate student at PPPL Ian Ochs wins top Princeton University fellowship

    Graduate student in plasma physics at the Princeton Plasma Physics Laboratory has won a highly selective honorific fellowship from Princeton University.

    U.S. Department of Energy's INCITE program seeks proposals for 2021

    U.S. Department of Energy's INCITE program seeks proposals for 2021

    The INCITE program is now seeking proposals for high-impact, computationally intensive research projects that require the power and scale of DOE's leadership-class supercomputers.

    Argonne's Paul Dickman honored with nuclear waste management achievement award

    Argonne's Paul Dickman honored with nuclear waste management achievement award

    Paul Dickman has been named a Waste Management Symposium Fellow for 2020.


    • Filters

    • × Clear Filters
    Harvesting Energy from Light using Bio-inspired Artificial Cells

    Harvesting Energy from Light using Bio-inspired Artificial Cells

    Scientists designed and connected two different artificial cells to each other to produce molecules called ATP (adenosine triphosphate).

    Engineering Living Scaffolds for Building Materials

    Engineering Living Scaffolds for Building Materials

    Bone and mollusk shells are composite systems that combine living cells and inorganic components. This allows them to regenerate and change structure while also being very strong and durable. Borrowing from this amazing complexity, researchers have been exploring a new class of materials called engineered living materials (ELMs).

    Excavating Quantum Information Buried in Noise

    Excavating Quantum Information Buried in Noise

    Researchers developed two new methods to assess and remove error in how scientists measure quantum systems. By reducing quantum "noise" - uncertainty inherent to quantum processes - these new methods improve accuracy and precision.

    How Electrons Move in a Catastrophe

    How Electrons Move in a Catastrophe

    Lanthanum strontium manganite (LSMO) is a widely applicable material, from magnetic tunnel junctions to solid oxide fuel cells. However, when it gets thin, its behavior changes for the worse. The reason why was not known. Now, using two theoretical methods, a team determined what happens.

    When Ions and Molecules Cluster

    When Ions and Molecules Cluster

    How an ion behaves when isolated within an analytical instrument can differ from how it behaves in the environment. Now, Xue-Bin Wang at Pacific Northwest National Laboratory devised a way to bring ions and molecules together in clusters to better discover their properties and predict their behavior.

    Tune in to Tetrahedral Superstructures

    Tune in to Tetrahedral Superstructures

    Shape affects how the particles fit together and, in turn, the resulting material. For the first time, a team observed the self-assembly of nanoparticles with tetrahedral shapes.

    Tracing Interstellar Dust Back to the Solar System's Formation

    Tracing Interstellar Dust Back to the Solar System's Formation

    This study is the first to confirm dust particles pre-dating the formation of our solar system. Further study of these materials will enable a deeper understanding of the processes that formed and have since altered them.

    Investigating Materials that Can Go the Distance in Fusion Reactors

    Investigating Materials that Can Go the Distance in Fusion Reactors

    Future fusion reactors will require materials that can withstand extreme operating conditions, including being bombarded by high-energy neutrons at high temperatures. Scientists recently irradiated titanium diboride (TiB2) in the High Flux Isotope Reactor (HFIR) to better understand the effects of fusion neutrons on performance.

    Better 3-D Imaging of Tumors in the Breast with Less Radiation

    Better 3-D Imaging of Tumors in the Breast with Less Radiation

    In breast cancer screening, an imaging technique based on nuclear medicine is currently being used as a successful secondary screening tool alongside mammography to improve the accuracy of the diagnosis. Now, a team is hoping to improve this imaging technique.

    Microbes are Metabolic Specialists

    Microbes are Metabolic Specialists

    Scientists can use genetic information to measure if microbes in the environment can perform specific ecological roles. Researchers recently analyzed the genomes of over 6,000 microbial species.


    Spotlight

    Graduate student at PPPL Ian Ochs wins top Princeton University fellowship
    Friday April 17, 2020, 05:25 PM

    Graduate student at PPPL Ian Ochs wins top Princeton University fellowship

    Princeton Plasma Physics Laboratory

    Barbara Garcia: A first-generation college student spends summer doing research at PPPL
    Tuesday September 24, 2019, 04:05 PM

    Barbara Garcia: A first-generation college student spends summer doing research at PPPL

    Princeton Plasma Physics Laboratory

    Argonne organization's scholarship fund blazes STEM pathway
    Tuesday September 17, 2019, 05:05 PM

    Argonne organization's scholarship fund blazes STEM pathway

    Argonne National Laboratory

    Brookhaven Lab, Suffolk Girl Scouts Launch Patch Program
    Friday September 13, 2019, 11:30 AM

    Brookhaven Lab, Suffolk Girl Scouts Launch Patch Program

    Brookhaven National Laboratory

    From an acoustic levitator to a
    Thursday September 12, 2019, 03:05 PM

    From an acoustic levitator to a "Neutron Bloodhound" robot, hands-on research inspires PPPL's summer interns

    Princeton Plasma Physics Laboratory

    Brookhaven Lab Celebrates the Bright Future of its 2019 Interns
    Friday August 30, 2019, 10:00 AM

    Brookhaven Lab Celebrates the Bright Future of its 2019 Interns

    Brookhaven National Laboratory

    PPPL apprenticeship program offers young people chance to earn while they learn high-tech careers
    Thursday August 01, 2019, 12:05 PM

    PPPL apprenticeship program offers young people chance to earn while they learn high-tech careers

    Princeton Plasma Physics Laboratory

    Creating a diverse pipeline
    Friday July 19, 2019, 01:05 PM

    Creating a diverse pipeline

    Princeton Plasma Physics Laboratory

    JSA Awards Graduate Fellowships for Research at Jefferson Lab
    Monday July 08, 2019, 03:00 PM

    JSA Awards Graduate Fellowships for Research at Jefferson Lab

    Thomas Jefferson National Accelerator Facility

    ILSAMP Symposium showcases benefits for diverse students, STEM pipeline
    Monday May 20, 2019, 12:05 PM

    ILSAMP Symposium showcases benefits for diverse students, STEM pipeline

    Argonne National Laboratory

    Integrating Scientific Computing into Science Curricula
    Monday May 13, 2019, 11:05 AM

    Integrating Scientific Computing into Science Curricula

    Brookhaven National Laboratory

    Students from Minnesota and Massachusetts Win DOE's 29th National Science Bowl(r)
    Monday April 29, 2019, 02:05 PM

    Students from Minnesota and Massachusetts Win DOE's 29th National Science Bowl(r)

    Department of Energy, Office of Science

    DOE's Science Graduate Student Research Program Selects 70 Students to Pursue Research at DOE Laboratories
    Friday April 12, 2019, 03:05 PM

    DOE's Science Graduate Student Research Program Selects 70 Students to Pursue Research at DOE Laboratories

    Department of Energy, Office of Science

    Young Women's Conference in STEM seeks to change the statistics one girl at a time
    Thursday March 28, 2019, 03:05 PM

    Young Women's Conference in STEM seeks to change the statistics one girl at a time

    Princeton Plasma Physics Laboratory

    Students team with Argonne scientists and engineers to learn about STEM careers
    Tuesday March 12, 2019, 05:05 PM

    Students team with Argonne scientists and engineers to learn about STEM careers

    Argonne National Laboratory

    Lynbrook High wins 2019 SLAC Regional Science Bowl competition
    Wednesday February 13, 2019, 02:05 PM

    Lynbrook High wins 2019 SLAC Regional Science Bowl competition

    SLAC National Accelerator Laboratory

    Equipping the next generation for a technological revolution
    Thursday January 24, 2019, 01:05 PM

    Equipping the next generation for a technological revolution

    Argonne National Laboratory

    Chemistry intern inspired by Argonne's real-world science
    Friday January 18, 2019, 05:05 PM

    Chemistry intern inspired by Argonne's real-world science

    Argonne National Laboratory

    Chasing a supernova
    Friday January 18, 2019, 04:05 PM

    Chasing a supernova

    Argonne National Laboratory

    Argonne intern streamlines the beamline
    Tuesday January 08, 2019, 02:05 PM

    Argonne intern streamlines the beamline

    Argonne National Laboratory

    Research on Light-Matter Interaction Could Lead to Improved Electronic and Optoelectronic Devices
    Thursday October 11, 2018, 04:00 PM

    Research on Light-Matter Interaction Could Lead to Improved Electronic and Optoelectronic Devices

    Rensselaer Polytechnic Institute (RPI)

    Innovating Our Energy Future
    Wednesday October 03, 2018, 07:05 PM

    Innovating Our Energy Future

    Oregon State University, College of Engineering

    Physics graduate student takes her thesis research to a Department of Energy national lab
    Tuesday October 02, 2018, 03:05 PM

    Physics graduate student takes her thesis research to a Department of Energy national lab

    University of Alabama at Birmingham

    Friday September 21, 2018, 01:05 PM

    "Model" students enjoy Argonne campus life

    Argonne National Laboratory

    Writing Code for a More Skilled and Diverse STEM Workforce
    Thursday September 06, 2018, 01:05 PM

    Writing Code for a More Skilled and Diverse STEM Workforce

    Brookhaven National Laboratory

    New graduate student summer school launches at Princeton Plasma Physics Laboratory
    Tuesday September 04, 2018, 11:30 AM

    New graduate student summer school launches at Princeton Plasma Physics Laboratory

    Princeton Plasma Physics Laboratory

    The Gridlock State
    Friday August 31, 2018, 06:05 PM

    The Gridlock State

    California State University (CSU) Chancellor's Office

    Meet Jasmine Hatcher and Trishelle Copeland-Johnson
    Friday August 31, 2018, 02:05 PM

    Meet Jasmine Hatcher and Trishelle Copeland-Johnson

    Brookhaven National Laboratory

    Argonne hosts Modeling, Experimentation and Validation Summer School
    Friday August 24, 2018, 11:05 AM

    Argonne hosts Modeling, Experimentation and Validation Summer School

    Argonne National Laboratory

    Students affected by Hurricane Maria bring their research to SLAC
    Wednesday August 22, 2018, 01:05 PM

    Students affected by Hurricane Maria bring their research to SLAC

    SLAC National Accelerator Laboratory

    Brookhaven Lab Pays Tribute to 2018 Summer Interns
    Wednesday August 22, 2018, 10:05 AM

    Brookhaven Lab Pays Tribute to 2018 Summer Interns

    Brookhaven National Laboratory

    Changing How Buildings Are Made
    Monday August 20, 2018, 12:05 PM

    Changing How Buildings Are Made

    Washington University in St. Louis

    CSUMB Selected to Host Architecture at Zero Competition in 2019
    Thursday August 16, 2018, 12:05 PM

    CSUMB Selected to Host Architecture at Zero Competition in 2019

    California State University, Monterey Bay

    Department of Energy Invests $64 Million in Advanced Nuclear Technology
    Friday July 20, 2018, 03:00 PM

    Department of Energy Invests $64 Million in Advanced Nuclear Technology

    Rensselaer Polytechnic Institute (RPI)

    Professor Miao Yu Named the Priti and Mukesh Chatter '82 Career Development Professor
    Thursday July 19, 2018, 05:00 PM

    Professor Miao Yu Named the Priti and Mukesh Chatter '82 Career Development Professor

    Rensselaer Polytechnic Institute (RPI)

    2018 RHIC & AGS Annual Users' Meeting: 'Illuminating the QCD Landscape'
    Tuesday July 03, 2018, 11:05 AM

    2018 RHIC & AGS Annual Users' Meeting: 'Illuminating the QCD Landscape'

    Brookhaven National Laboratory

    Argonne welcomes <em>The Martian</em> author Andy Weir
    Friday June 29, 2018, 06:05 PM

    Argonne welcomes The Martian author Andy Weir

    Argonne National Laboratory

    Creating STEM Knowledge and Innovations to Solve Global Issues Like Water, Food, and Energy
    Monday June 18, 2018, 09:55 AM

    Creating STEM Knowledge and Innovations to Solve Global Issues Like Water, Food, and Energy

    Illinois Mathematics and Science Academy (IMSA)

    Professor Emily Liu Receives $1.8 Million DoE Award for Solar Power Systems Research
    Friday June 15, 2018, 10:00 AM

    Professor Emily Liu Receives $1.8 Million DoE Award for Solar Power Systems Research

    Rensselaer Polytechnic Institute (RPI)

    Celebrating 40 years of empowerment in science
    Thursday June 07, 2018, 03:05 PM

    Celebrating 40 years of empowerment in science

    Argonne National Laboratory

    Introducing Graduate Students Across the Globe to Photon Science
    Monday May 07, 2018, 10:30 AM

    Introducing Graduate Students Across the Globe to Photon Science

    Brookhaven National Laboratory

    Students from Massachusetts and Washington Win DOE's 28th National Science Bowl(r)
    Wednesday May 02, 2018, 04:05 PM

    Students from Massachusetts and Washington Win DOE's 28th National Science Bowl(r)

    Department of Energy, Office of Science

    The Race for Young Scientific Minds
    Thursday April 12, 2018, 07:05 PM

    The Race for Young Scientific Minds

    Argonne National Laboratory

    Q&A: Al Ashley Reflects on His Efforts to Diversify SLAC and Beyond
    Wednesday March 14, 2018, 02:05 PM

    Q&A: Al Ashley Reflects on His Efforts to Diversify SLAC and Beyond

    SLAC National Accelerator Laboratory

    Insights on Innovation in Energy, Humanitarian Aid Highlight UVA Darden's Net Impact Week
    Thursday February 15, 2018, 12:05 PM

    Insights on Innovation in Energy, Humanitarian Aid Highlight UVA Darden's Net Impact Week

    University of Virginia Darden School of Business





    Showing results

    0-4 Of 2215