Left: Image of a ring-shaped molecular host that contains just one iron atom. Right: X-ray absorption spectrum of single atom detected at location B in the molecular ring. Spectrum matches that of iron.
New capability for analyzing single atoms combines X-ray beams from Argonne’s Advanced Photon Source and atomic-scale imaging possible with a scanning tunneling microscopy probe.
Newswise — In the most powerful X-ray facilities in the world, scientists can analyze samples so small they contain only 10,000 atoms. Smaller sizes have proved exceedingly difficult to achieve, but a multi-institutional team has scaled down to a single atom.
“X-ray beams are used everywhere, including security scanning, medical imaging and basic research,” said Saw Wai Hla, physicist in the U.S. Department of Energy’s (DOE) Argonne National Laboratory and professor at Ohio University. “Since the discovery of X-rays in 1895, scientists have not been able to use them to detect and analyze just one atom. It has been a dream of scientists to be able to do so for decades. Now we can.”
As just announced in Nature, scientists from Argonne and several universities report being able to characterize the elemental type and chemical properties of just one atom by using X-ray beams. This new capability will impact fundamental research in numerous scientific disciplines and development of new technologies.
The results from X-ray beams yield a sort of fingerprint for the type of elements in a material. For example, the NASA Curiosity rover gathered small samples of sand on the Martian surface, then determined with X-ray analysis that their content is similar to volcanic soil in Hawaii.
“Being able to study one atom at a time will revolutionize X-ray applications to an unprecedented level, from quantum information technology to environmental and medical research.” — Saw Wai Hla, Argonne physicist and professor at Ohio University
Using powerful X-ray machines called synchrotron light sources, scientists can analyze samples as small as a billionth of a billionth of a gram. Such samples contain about 10,000 atoms. Smaller sizes have proved exceedingly difficult to achieve, but in an astonishing leap, the team managed to scale down their observations to a single atom.
“The word transformative gets bandied about a lot, but this discovery I believe is truly a major breakthrough,” Hla said. “I was so excited I could barely sleep as I imagined possible uses in the development of batteries and microelectronic devices and even in environmental and medical research.”
To characterize just one atom with X-rays, it needs to be isolated from the same kind of atoms. To do so, the team first entwined a single iron atom in a nanometer-size molecule composed of different elements.
They then took the sample for analysis with the powerful X-ray beam at Argonne’s light source, the Advanced Photon Source (APS). The team detected the single atom in the sample at a beamline (XTIP) shared by the APS and the Center for Nanoscale Materials (CNM). Both are DOE Office of Science user facilities at Argonne. The beamline includes a scanning tunneling microscopy (STM) probe.
“A DOE Early Career Research Program Award that I received in 2012 allowed me to form a team of passionate scientists and engineers to develop the microscopy technique used in this study,” said Volker Rose, physicist at the APS and in the CNM. “Together, we developed and built this one-of-a-kind microscope at the XTIP beamline thanks to additional DOE funding.”
The rush of photons from the X-ray beams bombard the sample, causing it to release electrons. Positioned less than a nanometer above the sample surface, the STM probe collects the electric signal due to the emitted electrons. The resulting spectra (plots of current versus photon energy) are “fingerprints” for the elements in the periodic table. Each element has a unique fingerprint. By probing the sample surface, scientists can thus identify an element of a particular atom and its exact location.
There is more. They can also determine the atom’s chemical state from the same spectrum. The chemical state has to do with the fact that atoms can lose a certain number of electrons; for example, iron can lose two, three or four electrons. The chemical state reflects the number of electrons missing and is important for scientists to know because it affects the physical, chemical and electronic properties of the atom.
To prove the new capability’s wider applicability, the team successfully repeated the same X-ray analysis with terbium, a rare earth element. Rare earths are critical to microelectronics, batteries, aircraft structures and more. The technique is applicable to elements besides metals as well. By knowing the properties of single atoms, scientists can then exploit their uses in materials in new ways.
“Being able to study one atom at a time will revolutionize X-ray applications to an unprecedented level, from quantum information technology to environmental and medical research,” Hla said.
In addition to Hla and Rose, other Argonne authors to the Nature paper include Tolulope M. Ajayi, Nozomi Shirato, Tomas Rojas, Sarah Wieghold, Kyaw Zin Latt, Daniel J. Trainer, Naveen K. Dandu, Sineth Premarathna, Daniel Rosenmann, Yuzi Liu and Anh T. Ngo. Contributors from Ohio University include Xinyue Cheng, Sanjoy Sarkar, Shaoze Wang and Eric Masson. Other contributors are Xiaopeng Li, Shenzhen University; Yiming Li, University of South Florida; and Nathalie Kyritsakas, University of Strasbourg.
This research was funded by the DOE Office of Basic Energy Sciences. Computing resources were provided by the Laboratory Computing Resource Center at Argonne.
About Argonne’s Center for Nanoscale Materials
The Center for Nanoscale Materials is one of the five DOE Nanoscale Science Research Centers, premier national user facilities for interdisciplinary research at the nanoscale supported by the DOE Office of Science. Together the NSRCs comprise a suite of complementary facilities that provide researchers with state-of-the-art capabilities to fabricate, process, characterize and model nanoscale materials, and constitute the largest infrastructure investment of the National Nanotechnology Initiative. The NSRCs are located at DOE’s Argonne, Brookhaven, Lawrence Berkeley, Oak Ridge, Sandia and Los Alamos National Laboratories. For more information about the DOE NSRCs, please visit https://science.osti.gov/User-Facilities/User-Facilities-at-a-Glance.
About the Advanced Photon Source
The U. S. Department of Energy Office of Science’s Advanced Photon Source (APS) at Argonne National Laboratory is one of the world’s most productive X-ray light source facilities. The APS provides high-brightness X-ray beams to a diverse community of researchers in materials science, chemistry, condensed matter physics, the life and environmental sciences, and applied research. These X-rays are ideally suited for explorations of materials and biological structures; elemental distribution; chemical, magnetic, electronic states; and a wide range of technologically important engineering systems from batteries to fuel injector sprays, all of which are the foundations of our nation’s economic, technological, and physical well-being. Each year, more than 5,000 researchers use the APS to produce over 2,000 publications detailing impactful discoveries, and solve more vital biological protein structures than users of any other X-ray light source research facility. APS scientists and engineers innovate technology that is at the heart of advancing accelerator and light-source operations. This includes the insertion devices that produce extreme-brightness X-rays prized by researchers, lenses that focus the X-rays down to a few nanometers, instrumentation that maximizes the way the X-rays interact with samples being studied, and software that gathers and manages the massive quantity of data resulting from discovery research at the APS.
This research used resources of the Advanced Photon Source, a U.S. DOE Office of Science User Facility operated for the DOE Office of Science by Argonne National Laboratory under Contract No. DE-AC02-06CH11357.
Argonne National Laboratory seeks solutions to pressing national problems in science and technology. The nation’s first national laboratory, Argonne conducts leading-edge basic and applied scientific research in virtually every scientific discipline. Argonne researchers work closely with researchers from hundreds of companies, universities, and federal, state and municipal agencies to help them solve their specific problems, advance America’s scientific leadership and prepare the nation for a better future. With employees from more than 60 nations, Argonne is managed by UChicago Argonne, LLC for the U.S. Department of Energy’s Office of Science.
The U.S. Department of Energy’s Office of Science is the single largest supporter of basic research in the physical sciences in the United States and is working to address some of the most pressing challenges of our time. For more information, visit https://energy.gov/science.
RSS