Missouri University of Science and Technology

Campus rallies to 3-D print protective medical gear

In response to COVID-19, Missouri S&T lends a helping hand, to Phelps Health medical system

When representatives from Phelps Health, anticipating a shortage of protective masks due to the coronavirus outbreak, needed help, students, faculty and staff at Missouri S&T answered by harnessing the power of technology and ingenuity.

Campus was abnormally quiet Saturday and Sunday, March 21-22, not only because it was the weekend before spring break but also because, due to the coronavirus outbreak, most students had moved out for the semester and a majority of faculty and staff prepared to work remotely. But 3-D printers in a couple of buildings on campus were humming away, fabricating prototype masks and face shield brackets.

Inside the Kummer Student Design Center, where S&T students usually work on rockets, solar cars, Mars rovers and other projects, a few students, faculty and staff outfitted one room Saturday with a dozen 3-D printers to produce prototypes for Phelps Health’s physicians, nurses and other medical workers.

Across campus, students at Missouri S&T’s Makerspace were using their 3-D printers to fabricate prototypes of the face shield brackets. The university enlisted more printers for the cause Sunday.

The S&T prototypes “are phenomenal,” says Dr. Casey Burton, director of medical research at Phelps Health.

Although there are no confirmed cases of COVID-19 in Rolla, Burton and Shawn Hodges, Phelps Health’s director of ancillary and surgical services, foresaw the need to obtain more protective gear for the Rolla-based regional health system.

“Shawn had already been experimenting with 3-D printed masks with Rolla High School but realized he needed to drastically scale up production capacity to meet the needs of our community,” Burton says. “He reached out to me to rally the university and beyond for their support and to help organize those operations with him on our end.”

Burton asked Missouri S&T Chancellor Mohammad Dehghani if it was possible to harness the university’s 3-D printing capabilities to aid in the effort. Dehghani directed others across campus to do what they could to assist.

The Kummer Student Design Center staff and students were among the first to respond. Dr. Chris Ramsay, assistant vice provost for student design and director of the center, marshalled the few remaining student members of the center’s 19 design teams to set up a 3-D printer farm to run 24 hours a day in the center at 10th Street and Bishop Avenue.

“We started out with five” 3-D printers at the design center, Ramsay says. “I sent a note out to all the design teams, and the students who were still in town brought their printers in and now we’re up to 12.

“This has re-energized our design team students,” Ramsay says. Hundreds of S&T students had worked since the fall on projects for design competitions that are now canceled due to the coronavirus. “This community need fulfills a hunger that they have to do something positive and meaningful in this crisis.”

While the design center produced prototype surgical masks, S&T’s Makerspace chief executive officer Daustin Hoelscher, a senior computer engineering major from Mascoutah, Illinois, was printing a prototype bracket for the face shields.

Phelps Health medical staff evaluated both product prototypes on Sunday and were continuing evaluations Monday.

“This could certainly be a game changer for us and even the rest of the world, so we appreciate Missouri S&T’s efforts,” says Dr. Brian Kriete, otolaryngologist and medical director of surgical services at Phelps Health.

“I’m so pleased with how our university community has come together to help in this time of need,” says Dehghani. “The rapid response and support for one of our important community partners typifies the true S&T spirit of innovation, ingenuity and community engagement. I am very proud of the way our university has responded to this critical need.”

The Rolla Public School System is also involved in the effort, with instructors at Rolla High School, Rolla Junior High School and Rolla Technical Institute (RTI) putting their 3-D printers to use. Some students in robotics classes and teams are also helping, says Dr. Amy Hermann, RTI director.

“RTI instructors Meghan Bilbrough and Leigh Ann Carpenter also sent out an ‘all call’ to all our robotics kids, saying if they had 3-D printers, we could help the community. Several robotics kids are now printing too,” she says.




Filters close

Showing results

110 of 2869
Released: 11-Aug-2020 4:15 PM EDT
Medical Organizations Team Up to Help Parents and Caregivers Navigate Return to Sports and Recreation during COVID-19 Pandemic
American Medical Society for Sports Medicine (AMSSM)

The American Academy of Pediatrics (AAP), American Medical Society For Sports Medicine (AMSSM) and National Athletic Trainers’ Association (NATA) have joined forces to address growing concerns and confusion amid youth sports and recreation participation during the coronavirus pandemic.

Released: 11-Aug-2020 4:10 PM EDT
DHS to Hold Virtual Industry Day Seeking Innovative Solutions for Coronavirus Response
Homeland Security's Science And Technology Directorate

DHS S&T is seeking groundbreaking solutions to address current and future operational needs. S&T issued the Emerging Needs: Covid-19 Response & Future Mitigation topic call through its Silicon Valley Innovation Program (SVIP).

Newswise:Video Embedded bouncing-sticking-exploding-viruses-understanding-the-surface-chemistry-of-sars-cov-2
VIDEO
Released: 11-Aug-2020 3:45 PM EDT
Bouncing, Sticking, Exploding Viruses: Understanding the Surface Chemistry of SARS-CoV-2
Michigan Technological University

Better understanding of the surface chemistry of the SARS-CoV-2 virus is needed to reduce transmission and accelerate vaccine design.

Released: 11-Aug-2020 3:05 PM EDT
High Blood Sugar May Worsen COVID-19 Outcomes
Michigan Medicine - University of Michigan

Preliminary observations of COVID-19 patients with diabetes inspired an algorithm for glucose monitoring that’s suspected to help combat the virus’ serious complications.

Newswise:Video Embedded thriving-not-just-surviving
VIDEO
Released: 11-Aug-2020 2:15 PM EDT
Thriving, Not Just Surviving
The Electrochemical Society

In our series, The ECS Community Adapts and Advances, Alex Peroff spoke to us from his home office. Whereas travel used to be the largest part of his job, now he focuses on developing content and meaningful communication. Alex joined Pine Research Instrumentation, Inc. as an Electroanalytical Scientist in 2016 after completing a PhD at Northwestern University.

Released: 11-Aug-2020 1:55 PM EDT
COVID-19 clinical trials lack diversity
University of Georgia

Despite disproportionately higher rates of COVID-19 infection, hospitalization and death among people of color, minority groups are significantly underrepresented in COVID-19 clinical trials.

Newswise:Video Embedded adjusting-to-a-changed-world
VIDEO
Released: 11-Aug-2020 12:45 PM EDT
Adjusting to a Changed World
The Electrochemical Society

In our series, The ECS Community Adapts and Advances, Mark Orazem recounts how he made good use of a sabbatical year that didn’t turn out to be anything like he expected. Currently Professor of Chemical Engineering at the University of Florida (UF), he was officially on leave for the 2019-2020 academic year. He is returning to a very different environment than he left a year ago.


Showing results

110 of 2869

close
2.12844